Measurement Guide

Charlotte Pipe is a registered trademark of Charlotte Pipe and Foundry Company.
Limited Warranty
Charlotte Pipe and Foundry Company
®
(Charlotte
Pipe
®
) Products are warranted to be free from
manufacturing defects and to conform to currently
applicable ASTM standards for a period of five years
from date of delivery. Buyer’s remedy for breach of
this warranty is limited to replacement of, or credit
for, the defective product. This warranty excludes
any expense for removal or reinstallation of any
defective product and any other incidental,
consequential, or punitive damages. This limited
warranty is the only warranty made by seller and
is expressly in lieu of all other warranties, express
and implied, including any warranties of
merchantability and fitness for a particular
purpose. No statement, conduct or description by
Charlotte Pipe or its representative, in addition to
or beyond this Limited Warranty, shall constitute a
warranty. This Limited Warranty may only be
modified in writing signed by an officer of Charlotte
Pipe.
This Limited Warranty will not apply if:
1) The Products are used for purposes other than
their intended purpose as defined by local
plumbing and building codes, and the applicable
ASTM standard.
2) The Products are not installed in good and
workmanlike manner consistent with normal
industry standards; installed in compliance with
the latest instructions published by Charlotte
Pipe and good plumbing practices; and installed
in conformance with all local plumbing, fire and
building code requirements.
3) The Products fail due to defects or deficiencies
in design, engineering, or installation of the
piping system of which they are a part.
4) The Products have been the subject of
modification; misuse; misapplication; improper
maintenance or repair; damage caused by the
fault or negligence of anyone other than Charlotte
Pipe; or any other act or event beyond the control
of Charlotte Pipe.
5) The Products fail due to the freezing of water in
the Products.
6) The Products fail due to contact with chemical
agents, fire stopping materials, thread sealant,
plasticized vinyl products, or other aggressive
chemical agents that are not compatible.
Any product proved to be defective in manufacture
will be replaced F.O.B. point of original delivery, or
credit issued, at the discretion of Charlotte Pipe.
Purchaser must obtain written permission and/
or a return goods authorization and instructions
for return shipment to Charlotte Pipe of any product
claimed defective, shipped in error or excess of
inventory needs.
Warning: Charlotte Pipe products are not to be used
with compressed air or gases. Charlotte Pipe does
not recommend that piping systems that include
its products be tested with compressed air or gases.
03/16/00
20