Measurement Guide

ManualsBrandsCharlotte Pipe ManualsFittings1-1/2 in. DWV PVC Double Sanitary Tee Fitting

DIMENSIONAL CATALOG

Plastics

DC-PL-F

(Updated May 2004)

Summary of content (24 pages)

PAGE 2
Plastic Pipe and Fitting Dimensions
PAGE 3
Table of Contents Page ABS “Foam Core” Schedule-40 DWV Pipe Dimensions ....................................................................... 1 PVC “Foam Core” Schedule-40 DWV Pipe Dimensions ....................................................................... 2 PVC Schedule-40 DWV and Pressure Pipe Dimensions ..................................................................... 3-4 Well Casing Dimensions ...............................................................................................
PAGE 4
ABS Foam Core Pipe A B S D W V P I P E ABS Foam Core Possession of this price list shall not be construed as an offer to sell the products listed. ABS Schedule 40 DWV Pipe (For Non-Pressure Applications) ABS SCHEDULE 40 FOAM CORE (BLACK) PART NO. PLAIN END TRUCKLOAD PERCENT PER SKID NOM. SIZE UPC # 611942- QTY. PER SKID ABS 3112 11/2" x 10' 03132 1720 2.083 ABS 3112 11/2" x 20' 03133 3440 ABS 3200 2" x 10' 03134 ABS 3200 2" x 20' ABS 3300 ASTM F 628 MIN. WALL (IN.) WT. PER 100 FT.
PAGE 5
PVC Foam Core Pipe PVC Foam Core Possession of this price list shall not be construed as an offer to sell the products listed. PVC Schedule 40 DWV Pipe (For Non-Pressure Applications) PVC SCHEDULE 40 FOAM CORE (WHITE) PART NO. NOM. SIZE 1 UPC # 611942- QTY. PER SKID PLAIN END TRUCKLOAD PERCENT PER SKID ASTM F 891 AVG. OD (IN.) MIN. WALL (IN.) WT. PER 100 FT. (LBS.) LIST PRICE PER 100 FT. PVC 4112 1 /2" x 10' 04178 1720 2.083 1.900 0.145 38.1 $89.00 PVC 4112 11/2" x 20' 04177 3440 4.
PAGE 6
PVC Pipe: Drainage, Pressure and Well Casing PVC Pipe: Drainage, Pressure and Well Casing Possession of this price list shall not be construed as an offer to sell the products listed. PVC Schedule 40 DWV and Schedule 40 Pressure Pipe - Plain End PVC SCHEDULE 40 (WHITE) & P R E S S U R E P I P E PVC 1120 ASTM D 1785 UPC # 611942- 1 03922 4.166 9000' .840 .109 600 PSI 15.9 $ 41.60 3 /4"x20' 03925 4.166 7000' 1.050 .113 480 PSI 21.1 $ 54.00 PVC 4010 1"x20' 03928 4.166 6000' 1.
PAGE 7
PVC Pipe: Drainage, Pressure and Well Casing PVC Schedule 40 DWV and Schedule 40 Pressure Pipe - Bell End PVC SCHEDULE 40 (WHITE) PART NO. NOM. SIZE BELL END UPC # 611942- TRUCKLOAD PERCENT PER SKID QTY. PER SKID AVG. OD (IN.) PVC 1120 MIN. WALL (IN.) MAX WORK PRESSURE AT 23° C OR 73° F ASTM D 1785 BELL DEPTH (IN.) WT. PER 100 FT. (LBS.) LIST PRICE PER 100 FT. PVC 4005B** 1 04986 2.083 6000' .840 .109 600 PSI 2.00 15.9 $ 41.60 PVC 4005B** 1 03923 4.166 9000' .840 .
PAGE 8
PVC Pipe: Drainage, Pressure and Well Casing PVC Well Casing PVC SCHEDULE 40 (WHITE) BELL END WELL CASING PVC 1120 NOM. SIZE UPC # 611942- TRUCKLOAD PERCENT PER SKID QTY. PER SKID AVG. OD (IN.) MIN. WALL (IN.) PVC 4020B 2"x20' 03932 3.570 1980' 2.375 .154 PVC 4025B 21/2"x20' 04206 3.570 1360' 2.875 PVC 4030B 3"x20' 03933 3.570 920' PVC 9400B 4"x20' 03964 7.144 PVC 9600B 6"x20' 03965 PVC 9800B 8"x20' 03967 PART NO. SDR 17 and DR 27.6 PART NO.
PAGE 9
PVC Sewer Pipe PVC Sewer Pipe P V C S E W E R Possession of this price list shall not be construed as an offer to sell the products listed. P I P E PVC SDR 35 PSM Pipe ASTM D 3034 & ASTM F 477 SDR-35 GASKETED - PS 46 PART NO. NOM. SIZE UPC # 611942- QTY. PER SKID TRUCKLOAD PERCENT PER SKID S/M 6004G 4"x13' 04011 780 4.763 13'-0" 110.4 4.215 .120 $ 286.00 S/M 6004G 4"x20' 04012 1200 7.144 20'-0" 109.7 4.215 .120 286.00 S/M 6006G 6"x13' 04015 364 4.763 13'-0" 249.6 6.
PAGE 10
PVC Foam Core Sewer Pipe PVC Foam Core Sewer Pipe Possession of this price list shall not be construed as an offer to sell the products listed. PVC Foam Core Gravity Sewer Pipe F O A M C O R E S E W E R P I P E SOLVENT WELD - PS 50 QTY. PER SKID TRUCKLOAD PERCENT PER SKID 04002 600 4"x20' 04003 S/M 5600 6"x10' S/M 5600 6"x20' PART NO. NOM. SIZE S/M 5400 4"x10' S/M 5400 UPC # 611942- ASTM F 891 AVG. OD (IN.) MIN. WALL (IN.) WT. PER 100 FT. (LBS.) LIST PRICE PER 100 FT. 4.160 4.215 .
PAGE 11
PVC and ABS DWV Fittings PART NO. 102 PVC and ABS DWV Fittings PIPE INCREASER-REDUCER SIZE SIZE 11/4 11/2 2 3 4 6 8 10 12 A 1.910 2.385 3.515 4.515 6.647 A 1.675 1.915 2.390 3.520 4.520 6.647 8.655 10.776 12.778 C .750 .875 1.500 1.750 3.000 PVC B 1.650 1.895 2.370 2.495 4.495 6.614 8.610 10.737 12.736 C .750 .750 .875 1.500 1.750 3.000 4.000 5.000 6.000 SIZE 11/4 11/2 2 3 4 6 8 10 12 D .156 .156 .156 .218 .250 .281 .322 .365 .406 PART NO.
PAGE 12
PVC and ABS DWV Fittings PART NO. 104-R* TRAP ADAPTER-FEMALE WITH/11/2 PLASTIC NUT AND WASHER AND 11/2 X 11/4 WASHER HUB X SLIP W/PLASTIC NUT SIZE A B C 11/2 PART NO. 105 PART NO. 108-X D 10 x 8 12 x 8 /16 * ABS ONLY SPIGOT X FPT A B 5 1 /2 2 3 4 6 /32 /32 7 /32 1 /4 5 /16 5 C PART NO. 109 D 3 /4 /4 13 1 /64 15/16 13/32 3 (Octogon shoulders for tightening purposes.) FITTING CLEANOUT ADAPTER MALE ADAPTER MPT X HUB (NOTE: NOT A TRAP ADAPTER. WILL NOT ACCEPT A TAIL PIECE.
PAGE 13
PVC and ABS DWV Fittings PART NO. 118 ADAPTER BUSHING 3 4 1 1 /2 13/4 EXPANSION JOINT PART NO. 133** (Adapts DWV hub to sewer and drain spigot) DWV SPIGOT X HUB SIZE A B C D HUB X HUB A B SIZE 1 /4 2 C D C D C D 5 1/ 4 5 1/ 2 5 1/ 2 2 3 4 3 ** Install in neutral position. Fitting has 1” travel in each direction. PART NO. 119 NO-HUB ADAPTER (Adapts C.I. No-Hub spigot to DWV spigot) SPIGOT X HUB SIZE A B C 1 1 /2 2 2 x 11/2 3 4 4x3 PART NO. 122 PART NO.
PAGE 14
PVC and ABS DWV Fittings 1/4 BEND, STREET PART NO. 302 (Sanitary 90°Street Ell) SPIGOT X HUB A B SIZE 1 9 1 /4 11/2 2 3 4 6 PART NO. 303 1 /16 13/4 25/16 31/16 37/8 5 PART NO. 311 C D 5 2 /16 21/2 33/16 49/16 55/8 8 LONG SWEEP 1/4 BEND, W/SIDE INLET SIZE ALL HUB A B C 3x3x2 41/16 13/8 1 3/ 4 1/4 BEND, W/LOW HEEL INLET SIZE ALL HUB A B 3 x 3 x 11/2 3x3x2 4x4x2 31/16 31/16 37/8 43/16 47/16 57/16 C D 1/6 BEND PART NO. 319 SIZE PART NO.
PAGE 15
PVC and ABS DWV Fittings 1/16 BEND PART NO. 324 (221/2°Ell) HUB X HUB A B SIZE 11/2 2 3 4 6 C D /2 11 /16 13 /16 1 1 1 /2 (22 /2°Street Ell) SPIGOT X HUB A B 11/2 2 3 4 6 1 /2 /16 13 /16 1 1 1 /2 11 13/16 1 1/ 2 1 7/ 8 ALL HUB A SIZE C D C D 1 1/ 4 1 1/ 2 2 3 4 6 8 11/4 19/16 25/16 23/4 41/2 SIZE 11/2 2 3 2 x 11/2 x 11/2 SIZE ALL HUB A B C D STRAIGHT TEE PART NO.
PAGE 16
PVC and ABS DWV Fittings PART NO. 404 SANITARY TEE, STREET REDUCING SIZE SPIGOT X HUB X HUB A B 2 x 11/2 x 11/2* 2 x 11/2 x 2 2 x 2 x 11/2 3 x 3 x 11/2 3x3x2 4x4x2 PART NO. 416 23/16 311/16 23/16 49/16 23/16 4 29/16 43/16 27/8 413/16 35/16 415/16 * ABS ONLY C PART NO. 429 D SIZE 25/16 33/16 213/16 31/4 35/8 313/16 P V C & A B S D W V F I T T I N G S SIZE ALL HUB A B 3 x 3 x 3 x 11/2 3x3x3x2 4x4x4x2 31/16 31/16 37/8 47/8 47/8 61/8 C PART NO.
PAGE 17
PVC and ABS DWV Fittings CLEANOUT TEE PART NO. 444-X DOUBLE FIXTURE FITTING PART NO. 500 HUB X HUB X FPT SEE PART NO. 445 AND 106 SIZE ALL HUB A B 2 31/2 45/8 2 x 11/2 x 11/2 x 11/2 27/8 31/2 2 x 11/2 x 2 x 2* 31/2 45/8 2 x 2 x 11/2 x 11/2 27/8 31/2 3 415/16 63/4 3 x 2 x 3 x 3* 415/16 615/16 *ABS ONLY C D 4 1/ 4 3 1/ 8 4 1/ 4 3 1/ 8 6 1/ 4 6 1/ 4 41/2 35/8 41/2 35/8 65/8 65/8 CLEANOUT TEE PART NO.
PAGE 18
PVC and ABS DWV Fittings PART NO. 507 DOUBLE COMBINATION WYE & 1/8 BEND SIZE ALL HUB A 11/2 2 3 4 2 x 2 x 11/2 x 11/2 3x3x2x2 4x4x2x2 4x4x3x3 33/8 41/2 617/64 81/4 35/8 65/64 631/32 67/8 B C WYE PART NO.
PAGE 19
PVC and ABS DWV Fittings DOUBLE WYE PART NO. 611 SIZE (DOUBLE 45°WYE) ALL HUB A B 11/2 2 3 4 6 4 5 65/8 81/4 103/16 11/8 13/8 15/8 17/8 13/4 PART NO. 704-P C D 27/8 35/8 5 63/8 7 8 /16 1 1/ 2 PART NO. 704-X DOUBLE WYE, REDUCING PART NO.
PAGE 20
PVC and ABS DWV Fittings PART NO. 711-P L.A. PATTERN P-TRAP PART NO. 812-P (w/Union) SLIP X HUB W/PLASTIC NUT SIZE A B C 11/2 423/32 4 D 323/32 211/32 PART NO. 815 PART NO. 711-X L.A. PATTERN P-TRAP 423/32 4 SIZE (w/Plastic Ring) SPIGOT A B 4x3 4x4 6 3/ 4 6 3/ 4 7 7 HUB X HUB A B SIZE 1 3 x 6 x 1 /2 C D PART NO. 820 CLOSET FLANGE SIZE HUB END A PART NO.
PAGE 21
Installation Procedure for PVC and ABS DWV Fittings Installation Procedures for ABS and PVC Piping Systems 3. Clean and Dry Pipe and Fittings • With our reliable, easy-to-install ABS and PVC TrueFit™ systems, Charlotte Pipe and Foundry is doing more than any other supplier to help contractors work more efficiently and productively. 3 I N S T A L L A T I O N Remove sur face dirt, grease, or moisture with a clean dry cloth.
PAGE 22
Installation Procedure for PVC and ABS DWV Fittings Nominal Pipe Size (in.) 1 /4 3 /8 1 /2 3 /4 1 11/4 11/2 2 21/2 3 4 5 6 8 10 12 14 16 A = Acceptable 7. Join Pipe and Fittings Applicator Type Brush Width (in.) Roller Length (in.) 1 /2 NR 1 /2 NR 1 /2 NR 1 NR 1 NR 1 NR 1 - 11/2 NR 1 1 - 1 /2 NR 11/2 - 2 NR 11/2 - 21/2 NR 2-3 3 3-5 3 3-5 3 4-6 7 6-8 7 6-8 7 7-8 7 8+ 8 NR = Not Recommended Dauber A A A A A A A A NR NR NR NR NR NR NR NR NR NR 6.
PAGE 23
Limited Warranty Charlotte Pipe and Foundry Company® (Charlotte Pipe®) Products are warranted to be free from manufacturing defects and to conform to currently applicable ASTM standards for a period of five years from date of delivery. Buyer’s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. This warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages.
PAGE 24
PO BOX 35430 CHARLOTTE NORTH CAROLINA 28235 PHONE (704) 348-6450 (800) 572-4199 FAX (800) 553-1605 LITERATURE BY FAX (800) 745-9382 WWW.CHARLOT TEPIPE.