ASSEMBLY INSTRUCTIONS Description : DINING PEDESTAL -1- Printed in Vietnam
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Description Qty 1 Bolt (M6x35mm) 8 2 Flat washer (6.5x13mm) 4 3 Flat washer (6.5x19mm) 4 4 Lock washer (6.5x11mm) 8 5 Flat washer (8.5x19mm ) 4 6 7 Hexagon nut (M8) 4 8 9 Allen key (4mm) 1 Lock washer (8.
STEP 2 Place the mounting plate (B) of the column (D), with bolts (1), washers (2) and (4) as shown below. Tighten with allen key (9). STEP 3 Carefully put the pedestal block on the bottom side of the table top, attach the top (A) to mounting plate (B) with bolts (1), washers (3) and (4) as shown below. Tighten with allen key (9).