ASSEMBLY INSTRUCTIONS Description : ROUND TABLE TOP Printed in Vietnam -1-
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free.
STEP 1 Attach the mounting plate (B) to the pedestal (D), with bolts (1), washers (2) and (4) as shown below. Tighten with Allen key (5). STEP 2 Carefully put the pedestal on the bottom side of the table top, attach the top (A) to mounting plate (B) with bolts (1), washers (3) and (4) as shown below. Tighten with Allen key (5).
