Installation & Assembly

- 2 -
BEFORE ASSEMB
LY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time
to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate,
identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
If hardware is missing or you have difficulty assembling this product, please call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART
LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
N
O
Description Qty Sketch NO Description Qty Sketch
A Top 1 B Table Leg 4
C
Glass Top
4
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following
hardware:
NO
Description
Qt
y
Sketch
NO
Description
Q
ty
Sketch
1
Bolt
(M8x70)
8 2
Lock washer
( Φ8.5xΦ11mm)
8
3
Flat Washer
( Φ8.5xΦ19mm)
8 4
Allen key
(M4mm)
1
5
Plastic Buttons
16
TABLE WITH 4 PANELS OF TEMPERED FROSTED GLASS TOP