Installation & Assembly

2
Connecting the wires
Installation
1
Install Fixture Mounting Screws
BLACK Supply Wire
BLACK Fixture Wire
WHITE Fixture Wire
WHITE Supply Wire
GROUND Supply Wire
GROUND Fixture Wire
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY
(not included):
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
D
E
B
A. Install xture mounting screws (A)
A. Connect the white supply wire to the white xture wire. B. Connect the black supply wire to the black xture wire. C. Connect the ground supply wire to the ground xture wire. D. Use wire nuts to secure all connections.
WARNING: Installation must be performed by a
qualied licensed electricion.
DANGER: Before installation, turn o the main power at the circuit breaker.
3
Installing the fixture
A. Install the xture mounting plate (B) onto xture screws and secure. B. Tighten xture housing balls (C). Do not over tighten. C. Install the LED light bulbs. D. Install the Globe (D) and metal decorative metal cover (E) over the globe using the screws and rubber washers. Do not over tighten.
A
C