Installation & Assembly

Assembly Instructions
1. Remove lamp parts from canton.
F
2. Remove plastic covering from lamp parts.
3. Stand lamp base (A) on the table.
4. Place the harp (B) into the holder and fix it pulling down the two cover.
5. Screw bulb (D) into the lamp holder (C ).
E
6. Place the shade (E) to the harp (B).
7. Fix the shade,screw the finial (F) into the harp top.
NOTE:
Tum the power off (unplug from electrical outlet ) before replacing the bulb ,making sure the
B
bulb has sufficient time to cool down.Do not subject the lamp to shock while lit as shattering of lamp
D
may result.
C
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is wider than the other ),as a feature to reduce the
risk of electric shock .This plug will fit in a polarzed outlet in only one way .If it does not fit fully in
the outlet, reverse the plug .If it still does not fit ,contact a qualified electrician.Never use with an
extension cord unless the plug can be fully inserted.
DO NOT ALTER THE PLUG.
A
Bulb not included
Shade Size:7×14/10×16/×9½"