Assembly and Installation Instructions

ManualsBrandsCharlton Home ManualsLantern Outdoor Wall LightingFaning 1-Light Outdoor Wall Lantern

Bolt Nut

Dome

Mounting Screw

Screw

Fixture Wire

Lock Nut

Cross Bar

House Grounding Wire

Green Grounding Screw

Fixture Grounding Wire

Wire Nut

Outlet Box

Back Plate

Ball Nut

Small Rubber Pad

Stud

1. Thread two screws through the cross bar, then secure them with

two lock nuts. Adjust the length of the screws if necessary.

2. Attach the cross bar to the outlet box by using two mounting screws.

3. Unscrew the ball nuts and remove the frame away from the fixture.

4. Unscrew and remove the screws and clips from the frame. Place

the flat glasses into the frame carefully, and then restore the screws

and clips back to secure the flat glasses. (See Fig.1 and Fig.2)

Note: Slide the narrow side of the flat glass downward into

the notch inside of the frame.

5. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections

using the wire nuts:

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the cross bar with the green grounding screw. Then connect

it to the house grounding wire with a wire nut.

Carefully put the wires back into the outlet box.

6. Attach the back plate to the cross bar by inserting the screws, then secure it with two bolt nuts.

7. Install a bulb (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

8. Restore the frame back to the fixture, and then secure it with small rubber pads and ball nuts.

9. Turn on the power at the main fuse or circuit breaker box.

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

Fig. 1

Frame

Flat Glass

The Narrow Side

Clip

Frame

Screw

Fig. 2

Bulb T ype A Max.100W

(not included)

ASSEMBLY AND INSTALLATION

INSTRUCTIONS