Installation & Assembly

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Loop
Parts:
Bulb Type A Max.100W
(not included)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
Main Fixture
Socket
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Nipple(G)
Canopy (I)
Top Loop (H)
Hex Nut (E)
Washer (F)
Collar (J)
Loop Lock (K)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Nipple(G)
Top Loop (H)
Collar (J)
1. Attach nipple to the mounting strap, then secure
it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by
using two mounting screws.
3. Secure the loop to the stem of the main fixture.
4. Adjust the arms of the fixture according to the
drawing of the package. Then fix them to the
metal ring by using the set screws.
Important:
a. The arms of each tier (bottom, middle)
should be positioned with equal
distances between them.
b. The arms should be fixed securely.
5. Choose the length of the chain you need,
then weave the fixture wire and the fixture
grounding wire through the chain. Then
connect one end of the chain with the
loop by using the loop lock.
6. Secure the top loop to nipple.
7. Thread the fixture wire and fixture
grounding wire through the collar,
canopy, top loop, nipple and mounting
strap.
8. Connect the other end of the chain with
the top
loop by using the loop lock.
9. Pull out the outlet wires and the house
grounding wire from the outlet box. Make
wire connections by using the wire nuts:
---The smooth wire (marked) from the
fixture to the black wire from the power source.
Arm
Stem
Glass Bracket
Glass Shade (M)
Socket Ring
Socket Fixer
Set Screw
Metal Ring
Glass Shade (M) (X9)