Installation & Assembly

MADE IN CHINA
Please consult your electrician for hanging fixture and wiring.
12W LED
Page 1 of (2)
Outdoor Deck Lantern
To prevent water intrusion, caulk around post cup
where fixture meets the wall using outdoor silicone
sealant.
Page 2 of (2)
IMPORTANT:Turn off the power at the main fuse or circuit breaker box before staring installation
Locate all hardware & components before discarding packing
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Integral lamp holder ( A)
Step1.Connect fixture wires to
house wires. Ensure the right
matching as black to black,
white to white,ground to ground.
(Caution: Make sure connections
are secure, in Right Polarity and in
Good Insulation)
Step2. Install expansion screw (B) into
ground (A) and secure using washers
(C&D) and tightening hex nut (E)
1.)
Expansion
screw
Hex nut
Washer
Washer
Black,white and
ground wire
Ground
PRODUCT NAME:
LED