Installation & Assembly

ManualsBrandsCharlton Home ManualsDusk to Dawn Post LightsAlmonte 15'' H Solar Powered Integrated LED Multi Mount Lantern

Introduction

Thank you for your purchase. This solar charged lighting eliminates the problems

associated with most solar lighting available today. These solar charged lights are

brighter and last all night with a typical solar charge. Unique design, superior light

output and numerous installation options confirm the outstanding value of our

product.

Please read the instruction manual carefully to obtain the best results from your

purchase.

Summary of content (4 pages)

PAGE 1
Introduction Thank you for your purchase. This solar charged lighting eliminates the problems associated with most solar lighting available today. These solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. Please read the instruction manual carefully to obtain the best results from your purchase.
PAGE 2
Tools that are needed but not supplied with the solar post lamps are: a screw driver and a power drill. Visit our website or download the latest version of your instruction manual Solar Lamp Location: For optimum light duration throughout the night, it is very important to place the solar panel in a spot where it will receive the maximum amount of direct sunlight throughout the day. Also, for best results install your solar panel facing the south. Assembly instructions (Fig. 1) Fig.
PAGE 3
" Fitter Mount NOTE: If you are replacing an existing gas/electric post light, you must consult a certified technician to disconnect them before installation. 1. Screw Part (B) on top of the existing 3” post using the screws provided. 2. Screw Part (A) into Part (B). Installing\Replacing the Solar LED Bulb (Fig. 2 / Fig. 3) The Solar LED Bulb is designed to last up to 10 years, however if it doesn’t work, or if you want to use different color temperature bulb, it can be easily replaced. 1.
PAGE 4
Replacing the Batteries (Fig. 2 / Fig. 5) (After several years of use, the battery may need replacing). 1. Detach the top of the lamp unit (E) by releasing the 2 screws. Make sure the Low/OFF/High switch is in the OFF (O) position. 2. Unscrew the battery compartment screw. 3. Unclip the connector and remove the old battery. Make sure the new battery is high quality 3.2V/3000mAh Li-Ion rechargeable battery with connector. 4.