Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURN TRUE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Some furniture comes with height adjustment knobs underneath each leg.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#A x PCs #B x PCs #C x PCs 1. With the help of another person, carefully place the table top (#1) facing down on a protected surface. FR Il. Align the to the per-drilled holes on the comers of the table © o Ill. Prepare 8 bolt assemblies by FIRST inserting the lock onto the bolt (#A) then © o the flat onto that SAME bolt #A).
|. Slide inward on both ends of the outer-piece table until they are touching and sitting flush with the table leaf Il. Secure the parts together by locking the latches located under the table top Carefully turn the completed table upright. Make sure the table is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts are secured and properly tightened.
