Assembly Instructions

ASSEMBLY INSTRUCTIONS

1. CAREFULLY UNPACK AND FPLACE ALL PARTS

ON A SMOOTH SURFACE AND LAY THEM UP AS

PER THE SKETCH.

2. SCREW TUBE ( F ) ONTO SOCKET PART ( G ),THEN

PUT WASHER ( E ),BASE ( D ),WASHER ( C ) AND

( B ) THROUGH THE BOTTOM OF TUBE ( F ) AND

TIGHTEN IT BY NUT ( A ) WITH THE WRENCH ( J ).

3. INSERT THE HARP ( H ) INTO THE SADDLE OF THE

SOCKET PART ( G ).

4. PUT THE SHADE ( NOT INCLUDED ) ONTO THE

HARP ( H ) AND SCRW THE FINIAL ( I ) TIGHTLY.

5. INSERT THE POLARIZED PLUG ONTO OUTLET,

TURN ON THE SWITCH AND ENJOY YOUR LAMP.

WATTAGE : 3-WAY 150W TYPE A ( BULB

NOT INCLUDED )

IMPORTANT SAFETY INSTRUCTIONS :

THIS PORTABLE LAMP HAS A POLARIZED PLUG ( ONE BLADE IS WIDEER THAN THE OTHER )

AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A

POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,

REVERSE THE PLUG. IF IT STILL DOES NOT FIT,CONTACT A QUALIFIED ELECTRICIAN.

NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY INSERTED.

DO NOT ALTER THE PLUG.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE