Installation & Assembly

How to Assemble your Swag
1. Unwrap the entire 15’ cord so it
hangs freely.
2. Unscrew the Spider fitter knob. From
the bottom, insert knob into your spider-
fitter lampshade and hand tighten by
turning clock-wise. (see #2)
3. Position the plastic safety holder at
the appropriate height and work the cord
so it lays flat against the holder. (see #3)
4. Insert your hooks into your ceiling
and wall (see fig.#1) You will want to
drill 2 small pilot holes. If you are
unable to screw into a stud, use the
enclosed anchors.
5. Attach the plastic holder to the ceiling
hook and loop the wire over the wall
hook. Adjust the cord so shade hangs
straight.
6. Screw in a light bulb, plug in to your
wall outlet, and flip the rocker switch.
7. Pat yourself on the back for a great
instant home makeover!
Usage Tips
 Pendants are commonly positioned at 31” above the table or counter that they are lighting.
Try that height first and adjust as needed.
 For more energy-efficient lighting, try a CFL or LED bulb.
 Never exceed a 150w bulb. WARNING: Incandescent bulbs get HOT so be sure you
have 2” clearance for every 50watts. (so if you use a 100w incandescent bulb, leave 4”
clearance from any part of your lampshade.) CFL and LED bulbs generate much less heat
per watt and are a much safer choice if you want to use a narrow lampshade.
 Too bright? You can add a dimmer switch (see LampsUSA.com and search for “dimmer”)
Dimmers don’t work well with CFL or some LED light bulbs.
Congratulations on your new Swag Pendant light! Our classic
white pendant is designed to give you light exactly where you
need it without having to hire an electrician.
 For more great lighting solutions, visit LampsUSA.com
Plug-In Swag Pendant