ASSEMBLY GUIDE Note: This instruction booklet contains important safety information, please read and keep for future reference.
CAM LOCK SYSTEM | (1) CORRECT WRONG 2) | Ensure starting position is correct, adjust cam bolt by pushing or pulling during assembly. Turn clockwise until secure.
(AMERICA LOCK-PACE © {RE)SHELF SUPPORTER & fastener 4 shelf support R6 to left pare! BL and right panel BR: bi Fasten left panel BL, right panel BR to base’ Al sing 4 cam lock RS. &)Fasten 18ft panel BL, right pare] BR to hover board D using 4 cam lock R5.
{FLATCAR HEAD SCREW (S12 9X28 1BPCS Span 3. @)Fasten back panel F to left pane! BL. fight panel BR, base A and cover board B, using. 18 flat head screw b)Put shelf G on shelf support.
(FLATCAR HEAD SCREW ef) (TANDOORI KNOBBLY > 4, fasten left door B to left panel BL, right door © to right panel BR using 12 flat head screw b}Fasten door knob RY 10 left and right door B&C. Notelets loosen all screws and move the door slightly if you think the doors don't locate perfectly, then fasten all S Crews again.
