ASSEMBLY INSTRUCTIONS Description DINING CHAIR WITH WOOD SEAT Dimension : 18”1/2Wx23”Dx39”H Cube Size :40.3”x19”x11” NW : 35.2 GW : 41.
BEFORE ASSEMBLY Thank you for purchasing our product. This product has been designed for easy assembly and long lasting use. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO 1 Description Qty Sketch NO Long bolt 2 4 (M6x80mm) 3 Qty Sketch Medium bolt 4 (M6x60mm) Short bolt 4 2 Lock Washer 10 (Ø6.5x9) (M6x40mm) 5 Description Flat Washer 6 10 (Ø6.5x19) Allen Key 1 (4mm) STEP 1 Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen Key (6).
STEP 2 Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5). Tighten with Allen Key (6). Check to make sure two edges are flush or aligned. Otherwise, the chair will be wobbly. STEP 3 Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts.
