Assembly Guide

ASSEMBLY INSTRUCTIONS :
1. CAREFULLY UNPACK AND PLACE ALL PARTS
ON A SMOOTH SURFACE AND LAY THEM UP AS
PER THE SKETCH.
2. PLACE THE BASE(A) ON A SMOOTH SURFACE,
SCREW THE DECORATIVE POLE (B) ONTO BASE(A),
POLE(C) ONTO DECOTATIVE POLE(B) ,POLE(D) ONTO
POLE(C) ,POLE(E) ONTO POLE(D), DECORATIVE POLE(F)
ONTO POLE (E) IN TURN.
3. PUT THE SHADE (H) ONTO THE TOP OF SOCKET (G).
4. SCREW THE MOUNTING RING (I) INTO THE SOCKET (G)
TO TIGHTEN UP THE SHADE (H).YOUR LAMP IS NOW
READY TO ENJOY.
WATTAGE: 3-WAY 150W TYPE A (EX BULB)
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE
OTHER) AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL
FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE
OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT
A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS THE
PLUG CAN BE FULLY INSERTED. DO NOT ALTER THE PLUG.