Owner Manual

Assembly Instructions 2/5
STEP 1
Insert Cam Lock Screws
into pre-drilled holes of
Side Panels (B) and (C),
then tighten.
(See Figure 1)
Figure 1
I
B
Figure 2
Cam Lock Screw
B
C
Head Cap Bolt
D
D
E
F
Cam Lock
STEP 2
Attach Base (I) to
Side Panel (B) with
Head Cap Bolts.
(See Figure 2)
STEP 3
Attach Back Panels (D), Back Upright (E)
and Back Rail (F) to unit with Cam Lock.
(See Figure 3)
Figure 3
IMPORTANT
· Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.·
Do not tighten all the bolts until each part is properly assembled.·
Keep Hex Wrench as the bolts may need to be tightened in the future.·