Installation & Assembly

88 5518 30

Dining Table

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

PART LIST

HARDWARE LIST

Table Top

1 pc.

Connector Panel

1 pc.

Post

1 pc.

Leg

4 pcs.

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Key Wrench

1 pc.

Flat

Washer

16 pcs. (+ 1 extra)

Spring

Washer

16 pcs. (+1 extra)

Nut

12 pcs. (+1 extra)

Head Cap Bolt

4 pcs. (+1 extra)

Hex Wrench

1 pc.

Small

Hex Wrench

1 pc.

Tools recommended for assembly :Level

PAGE 1
88 5518 30 Dining Table IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST A. Table Top 1 pc. B. Connector Panel 1 pc. C. Post 1 pc. D. Leg 4 pcs. HARDWARE LIST Key Wrench 1 pc. Hex Wrench 1 pc.
PAGE 2
Assembly Instructions IMPORTANT * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. STEP 1 Attach Connect Panel (B) to Post (C), using Flat Washers, Spring Washers and Nuts. B C STEP 2 Turn the unit upside down on the soft cloth. D D STEP 3 D Attach Table Leg (D) to the unit, using Flat Washers, Spring Washers and Nuts.