Installation & Assembly

7
8
9
1010
11
D
G
H
5
x 2
Have the drawer face panel (7) upside down and insert cam bolts (A) and dowels (C) into the holes like the image.
Attach the drawer side panels (8 & 9) to the drawer face panel by aligning the holes to the cam bolts and dowels. Use
cam locks (B) to tighten them together.
Note: Make sure the grooving of the drawer face and side panels are aligned.
Insert the drawer bottom panel (10) by sliding it into the grooves.
Attach the drawer back panel (11) by aligning the holes to the holes on the drawer side panels.
Use screws (D) to tighten them together.
Align the hole on the knob (G) to the hole on the drawer face panel and tighten them together using screw (H).
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position
A
A
B
B
C
C
D
D
Note: Do not tighten cam locks until the bottom panel is inserted.
Note: Make sure all cam locks and screws are tightened.