Installation & Assembly

branch circuit conductor.

shock.

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

referencing the illustrations on the installation instructions.

Phillips screwdriver.

A - Connect the black wire from Fixture to the black supply wire.

B - Connect the white wire from Fixture to the white supply wire.

5. Install BULB (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

6. Attach the GLASS SHADE onto FIXTURE using MOUNTING SCREWS.

CAUTION

GENERAL

TOOLS REQUIRED

ASSEMBLY AND INSTALLATION

(CONT.)

Please read carefully and save these instructions, as you may need them at a later date.

Turn off the power at fuse or circuit breaker.

Turn on the power at fuse or circuit breaker.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN.

JUNCTION BOX SCREWS

PAN

GLASS SHADE

FIXTURE SCREWS

MOUNTING SCREWS

WIRE CONNECTORS

JUNCTION BOX

MOUNTING BAR

BULB TYPE A MAX.60W

(NOT INCLUDED)

1. Attach the two screws to the JUNCTION BOX.

2. Attach the MOUNTING BAR to the JUNCTION BOX using JUNCTION BOX SCREWS.

3. Pull out the supply wires and the SUPPLY GROUND WIRE from the OUTLET BOX. Make wire

connections using the wire nuts:

Then connect it to the SUPPLY GROUND WIRE with a WIRE CONNECTOR.

Carefully tuck the wires back into the JUNCTION BOX.

4. Attach the PAN to the MOUNTING BAR by inserting two SCREWS and rotating the PAN until it

locks in place. Then tighten the screws securely.

OUTDOOR CEILING

ASSEMBLY/INSTALLATION INSTRUCTIONS

GROUND SCREW

Item: ORB OUTDOOR CEILING

Item: BLK OUTDOOR CEILING