Assembly Instructions

USE AND MAINTENANCE
- Use on level surfaces only
- Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are still tight and working properly for safety.
- Only clean using a damp cloth and mild detergent, do not use bleach
or abrasive cleaners.
1 - Seat Base x1
PART LIST
2 - Back Rest x1
3 - Ear (seated left) x1
4 - Ear (seated right) x1
Assembly Instructions
1
2. Select 2 Back Rest.
Open back fabric
1. Unpack 1 - Seat Base and turn over
upside down. Remove any packing
straps or materials from underside of
Seat Base securing the footrest from opening
3. Select 1 - Seat Base and 2 - Back Rest.
With Backrest Buttons facing inward, carefully
align backrest mounts to seat-base mounts.
Insert bottom mounts into upper mounts
until they latch and backrest is secured
to seat-base. Exercising Caution, Carefully lift
upward on the backrest to confirm backrest
is secured.
2
1
4. Select 3 - Ear (seated left). Insert mount
on 3 into mount on 2 - Back Rest (if sitting - left
side, if standing facing right side).
5. Repeat for 4 - Ear (seated right).
6. Close the back fabric
Note: pull the right
handle (seated) to
release footrest
from the closed
position.
B
2
A
1
2
A
3
A
3
A
2
A
4
A
4
Swivel Recliner
7. Congratulations!
Setup of your new
Swivel Recliner
is complete!
If you need help or have damaged or missing parts, contact customer service Made in Vietnam