FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US PLEASE ENSURE TO HAVE THE MODEL # FROM THE PACKAGING OR INSTRUCTION BOOKLET TO RETURN THE PRODUCT: PLEASE CONTACT THE RETAILER WHERE THE ITEM WAS PURCHASED FROM
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PER-ASSEMBLY INFORMATION PART DESCRIPTION Fro Tong SIDE | Parquetry | DIVIDER | CENTER SHELF | | DOOR area ; avi area Cl i BACK PANEL | MIDDLE SHELF ; CABINET SHELF QTY 1 SET | Qry 2 | ary 4 DIVIDER OF WINE RACK QTY 15 NEED HELP? For help with assembly or if you are missing a part, Please call customer service
PER-ASSEMBLY INFORMATION HARDWARE DESCRIPTION T ALLEN KEY BOLT | ALLEN KEY SCREW | M6 X 30mm | M6 X 30mm | ALLEN KEY ary e | Daryl | Daryl § PHILLIPS SCREW i HANDLE a, ROUND HEAD M4 x25 mm M4 X 15mm MAGNET AND PLATE ary 2 SET ! ary 30 ! QTY 2 SETS WOOD DOWEL | PHILLIPS SCREW SHELF SUPPORT ary s ; Qry 24 ; qr viz Required Flathead screwdriver Phillips screwdriver Not Included C M4 X 25mm -QTY 1 TIPPING RESTRAINT QTY 1 SET PHILLIPS SCREW Quays PHILLIPS SCREW ary Max2smm-arv1 | > ¥ warmer NEED HELP? For help w
ASSEMBLY we NOTE: The screwdriver is not included in the hardware pack. 1. Attach 5 Divider Of Wine Soundtrack Middle Shelf (5) using 10 Phillips Screws {D 2. Use Phillips screwdriver to snugly tighten screw. 3. Repeat Step-1 for the second Middle Shelf and other 5 Divider Of Wine Racks(J) STEP-2 1. Attach 5 Divider Of Wine Soundtrack Bottom Shelf ©)using 10 Phillips Screws 2. Use a Phillips screwdriver to snugly tighten screw.
ASSEMBLY STEP-3 1. Attach Center Shelf (5) and using 2 Allen Key Screws(2) 2. Use Allen Key(3 to tighten Screws.
ASSEMBLY STEP-4 1. Attach 2 Middle Shelf (B) to Sides (B) using 4 Wed each Middle Shelf. 2. Attach Bottom Shelf Center Shelf (O) to Sides using 8 Allen Key Bolts (0) into per-drilled holes through on bar of Bottom Shelf {C)and Center Shelf) { 4 Bolts on each part}. 3. Use Allen tighten bolts.
EASIER STEP-5 1. Attach Top(B) to Sides (8) and Individualizing 9 Allen Key Screws(D) {3 screws on each Side and Divider). 2. Use Allen key@to tighten Screws. Do not over-tighten.
ASSEMBLY NOTE: The screwdriver is not included in the hardware pack. 1. Attach Back Panel ©to back frame of wine rack using 30 Phillips Screws Round Head (through per-drilled holes. 2. Use Phillips Screwdriver to tighten screws.
ASSEMBLY STEP-7 NOTE: The screwdriver is not included in the hardware pack. 1. Attach hinges on Doors(F to Sides (B) using Phillips guide holes. 2. Attach Magnet corners of Doors(Fusing Phillips screws {Dino guide holes on Doors(F) 3, Attach Magnets & using Phillips screws 0 into guide holes on Center shelf 4, Use Phillips screwdriver to snugly tighten screw. 5.
ASSEMBLY STEP-8 1. Use 4 Shelf Supports each Cabinet Shelf oO in desired location. 2.2 Shelf supports@ may be used on back top of each Cabinet shelf (Das a tipping restraint.
EASE NOTE: Injuries and damage can occur from furniture tip-over. It is important to use the safety bracket included. If the tipping restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. re NOTE: The screwdriver is not included in the hardware pack. STEP-9 1. To attach Tipping Restraint) follow instructions on Tipping Restraint package. When you determined the location for your unit, instill the Furniture Tipping restraint.
WARRANTY Thank you for purchasing a:product, These products have greenmail demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults fora period of 12 months from the date of purchase. This' warranty does not affect your statutory rights.