Assembly Instructions Caution: You must read this before you proceed SOFA Parts List Label Picture Description QTY(pc) A Seat Base 1 B Backrest 1 C Seat Cushion 3 D Back Cushion 3 E Left Arm 1 Page 1 OF 10
F Right Arm 1 G Front Seat Board 1 H Leg with 1 Plastic Gasket 4 I Middle Leg with 1 Plastic Gasket 1 ① Plastic Gasket 3 ② Allen Key 1 Hardware List Page 2 OF 10
Assembly Preparation Before Begining Assembly: Page 3 OF 10
Assembly Steps Back Cushion(D) Right Arm (F) Backrest(B) Seat Cushion(C) Front Seat Board(G) Left Arm (E) FRONT FACING Leg with 1 Plastic Gasket(H) This Sofa has multiple parts and may require about 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Carton Package A C B C C E D D D F G Small Carton Take the Seat Base(A), Backrest(B), Seat Cushion(C), Back Cushion(D), Left Arm Board(E), Right Arm Boad(F), Front Seat Board(G), and Small Bubble Pack out from the carton and place them on a clean, non-marring surface. Step 2 H J ① ② Bubble Pack Open the Bubble Pack to take out the Middle Leg with 1 Plastic Gasket, Leg with 1 Plastic Gaskets(H),Plastic Gaskets(①) and Allen Key(②).
Step 3 E F Carefully install the Legs with 1 Plastic Gaskets(H) at the bottom of Left Arm(E) and Right Arm(F). Insert threaded stem into the mounting position at the corner of Left Arm(E) and Right Arm(F), Tighten by turning the Legs clockwise. Take care of the shape of the Legs and ensure they in the correct postions. Note:The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbleness. Some Legs may need more than one gasket while some legs may not need anyny.
Step 5 B F G E With assistance from your adult partner, hold up the Backrest(B), while standing behind the Seat Base(A). Align the mounting brackets on both sides of the Backrest(B) with those on the hind of Left Arm (E) and Right Arm (F).
Step 6 J I Install the Middle Leg with 1 Plastic Gaskets(J) at the bottom of the Seat Base(A). Step 7 upward hook slot A F A B F G E Then turn the Sofa up as picture. With assistance from your adult partner,hold up the Seat Base(A) on the top of the assembled parts,put the front side of Seat Base(A) over on the rail of Front Seat Board(G) as picture.
Put the Seat Cushions(C) on the Seat Base(A). Step 9 D D D B Place the Back Cushions(D) against Backrest(B). Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Page 10 OF 10
