ASSEMBLY INSTRUCTION METAL QUEEN BED Headboard H Foot board Extension leg B Ear 1pc spec PCs 1pe H side rail Slats Support leg Dl Lott PCs PCs apes PCs W Brit Bolt Nut M Fiat washer 1/4° #16mm <> ¢ & PCs PCs PCs PCs Allen wrench Wrench 4X4MM 11.3MM 1pc spec This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Assemble the bar (D) to the extension leg (C) with PCs bolts (H), then fastened using Allen wrench (M). 2 Assemble the headboard (A) to the extension leg (C) with PCs bolt (J) and PCs flat washer (L), then fastened using Allen wrench (M) .
Assemble the side rail (E} to the extension leg (C) and the foot board (B) with PCs bolts (H), PCs bolts (J), apes nuts (K) and apes flat washer (L), then fastened using Allen wrench (M) and wrench (N). Assemble the slat (F) to the support leg (G) with 1pc bolt (1) and 1pc flat washer (L) for each support leg (G), then fastened using Allen wrench (M).
) Assemble the slat (F) to the side rail (E} with 1 pc bolt I), 1pc nut (K) and PCs flat washer (L) for each end of slat (F), then fastened using Allen wrench (M) and wrench (N). A WARNINGS: ® Do not remove warning label from bed. ® Use only mattress which is long and ® Do not allow horseplay or under the bed and prohibit jumping on the bed. . Periodically check and ensure that all the components are in their proper position, free from damage, and that all connectors are tight.