Saddle Stool For assistance with assembly, please contact Customer Satisfaction Center.
Pre-Assembly Instructions • • • • • • • • Read all instructions carefully before assembly. Find a smooth clean area in which to work to avoid damaging your item. Check that all parts and hardware from the lists are present.
Assembly Instructions: Step 1 Wait to fully tighten all hardware until the end of Step 2. A. Place Seat (A) upside down on a soft surface. Use two Bolts (3), two Spring Washers (2), and two Flat Washers (1), to loosely attach Right Leg (B) to Seat (A). TIP: Leg should line up perfectly with the apron of the chair, if there are any gaps between the leg and the seat frame, the leg is in the wrong corner B.
Step 2 A. Use two Screws (5), to loosely attach Long Stretcher (D) between Right Leg (B) and Left Leg (C) across the front of the stool. Be sure metal foot plate faces the bottom of the seat and screws on the foot plate face the center of the stool. TIP: Press both legs against the stretcher bar, lightly tighten the screws (5) to hold the stretcher bar in place. Make sure the stretcher bar is flush (no gaps) against the leg, this will help with stabilization. B.
Furniture Care Tips With proper care your furniture will look beautiful for years to come. • • • • • • • • • Avoid placing in direct sunlight to keep from fading and discoloring. Do not use soap or abrasive cleaners Use a soft damp cloth to remove normal dust and dirt, then dry with a clean cloth until completely dry.
