Caution : You must read this before you proceed Club Chair Page 1 OF 6
Label Description QTY A Backrest 1 B Seat 1 C Front Leg 2 D Back Leg 2 Description QTY ① Gasket 7 ② Bolt (M8*120 MM) 2 ③ Washer 2 ④ Allen Key 1 Label Picture Picture Before Beginning Assembly: Page 2 OF 6
Overview Backrest(A) Seat(B) Back Leg(D) Front Leg(C) FRONT FACING This Club Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Club Chair, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Seat(B) Position the Seat(B) on its back on a clean, non-marring surface as above.
Step 2 Seat(B) Use Gaskets(①) to achieve stablity Gasket(①) Front Leg(C) Front Leg(C) Back Leg(D) Install the first Front Leg(C) into the base of the Seat(B) by placing one Gasket(①) onto the threaded stem. Insert the threaded stem of the Front Leg(C) into one of the front mounting positions of the Seat(B), then tighten by turning the Leg clockwise until it is completely secure. Repeat this process with the remaining three Legs.
Step 4 Backrest(A) ③ ② ④ Seat(B) Put the Club Chair facedown as pictured above. Lock Seat(B) to Backrest(A) using Bolt(②) and Washer(③) with Allen Key(④). Tighten the Bolt fully. Step 5 Your Club Chair is ready for use. This Club Chair can only be used on a flat, level surface.
Page 6 OF 6
