Assembly Instructions

IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
SPRAY PAINTING TIPS
Primed is a DIY collection with shades that arrive primed and ready to decorate.
Please Note: The shade may be installed as-is, but if decorating the shade, the shade must be decorated before
it is installed.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
PAINTING
1. Check the spray can for the details on proper spraying distance and drying times.
2. Make sure you have enough paint to cover the shade in multiple layers.
3. Shake the spray can well to loosen the paint and avoid clumps.
i. If the spray tip is clogged, wipe off the opening with warm water or lacquer thinner.
ii. Never stick a pin or wire into the cap hole.
4. Do a test spray on something else to practice keeping your spray paint sweeps even and light.
5. Start at the bottom and begin spraying off to the side of the shade. In a sweeping motion, move the spray onto the surface
of the shade. Spray in sweeps until the entire shade has one thin layer. Use light spray sweeps to prevent paint runs.
6. Once the entire shade has a thin layer, allow the shade to dry fully before touching, moving, or applying additional paint to
the shade.
DRYING
1. Don’t touch it. Allow the shade to air dry completely before touching or moving. Note: forced air (i.e. fans) may force paint
to run or accumulate in one area.
2. Wait longer! Refer to the paint can for the recommended drying time and wait longer. Make sure paint has completely
cured before touching.
SETUP
1. Work in a well-ventilated area. If painting outside, note the direction of the wind. Be aware that wet paint can attract bugs.
2.Makesurethesurfaceonwhichyouplacetheshadewhenpaintingiscleanandat.
3. Protect your clothes, hands, and the area in which you are working from over-spray.
4. Wipe down the surface of the shade to create a smooth, clean surface for paint.
5. Tape the inside of the small top opening with painter’s tape to prevent spray from getting inside the shade.
SHADE PAINTING TIPS