Installation & Assembly

DINING TABLE

Table Top Table Leg Bolt

5/16" x 2-1/2"

Lock Washer

5/16"

Flat Washer

5/16"

Allen Key

1/4" x 2-3/8"

1pc 4pcs 8pcs 8pcs

8pcs 1pc

ASSEMBLY INSTRUCTION

This page lists all the contents included in

the box. Please take the time to identify the

hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded area

to protect them from damage.

PAGE 1
ASSEMBLY INSTRUCTION DINING TABLE Table Top Table Leg Bolt 5/16" x 2-1/2" Lock Washer 5/16" 1pc 4pcs 8pcs 8pcs Flat Washer 5/16" Allen Key 1/4" x 2-3/8" 8pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
Put Table Top (A) on smooth flat surface. Remove the four Adjustable Shelf with Phillips Head Screw Driver (not Included). Phillips Head Screw Driver Is Required But Not Included A Adjustable Shelf Attach the four Table Leg (B) to the Table Top (A) use Bolt (C), Lock Washer (D) and Flat Washer (E) on eight holes of the Table Top (A). Turn the Allen Key (F) in the Bolt (C). Hand tighten only at this moment by using Allen Key (F). B Take the Allen Key, and turn the bolts until the legs are secure.