Specifications

2 Light Wall Sconce
Fixture Finish: Pewter
Glass/Shade Finish:
Materials: Steel
Fixture Width: 8.625” 21.9075cm
Fixture Height: 10.125” 25.7175cm
Fixture Extension 5.5” 13.97cm
Glass Diameter:
Glass Height:
Canopy/Backplate: 4.5”W x 10.125”H x 0.75”E 11.43cmW x 25.72cmW x 1.905cmE
Chain: NA NA
Rod: NA NA
Wire: 8” 20.32cm
Bulb Type: Incandescent, Type B
Wattage: 2 x 60W(C)
Voltage: 120
Install Position: Not Reversible - Up Only
Approved Location: Damp Location
Sloped Ceiling: No
ADA: No
Close-to-ceiling: No
Bulbs Included: No
Dimmable: Yes
Slim candles xed to curved arms
Plated in soft pewter, this is a collection of strikingly attractive
minimalistic xtures. Clean and transitional, this elegant design
features slim candles xed to curved arms. Two candles are
balanced on each arc for added symmetry. This 2-light sconce can
be used in a hall, stairway, or foyer as an accent. It can be hung
individually or as a pair.
Dimensions and specications are approximate and based on the most current information possible at the time of publication. We reserve the right to make design changes and modications without prior
notice. Our products are UL/CUL approved. Unless otherwise noted as pending, Wattages stated are the maximum recommended; however, lower wattages may be used. Bulbs are not included unless
otherwise noted. Larger xtures may require reinforced outlet boxes and additional support. Receipt or possession of these materials does not constitute an agreement to sell.

Summary of content (1 pages)