60 INCH WIDE TV MEDIA STAND 1/18
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service or go to our website In order to assist you in a timely manner, please have the following information ready: Model # _______________________ Part Number or Letter_______________________ Purchased at ___________________Date of Purchase ___________________________ If you wish to return the product, please contact the retailer where
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A BR BL Fro nt / Ava nt Fro nt / Ava nt nt Ava nt / o r F TOP QTY 1 C DL Fro nt / Ava nt DR Fro nt / Ava nt nt Ava nt / Fro LEFT DIVIDER 1 QTY 1 BOTTOM SHELF QTY 1 F E RIGHT SIDE QTY 1 LEFT SIDE QTY 1 RIGHT DIVIDER 1 QTY 1 G Fro nt / Ava nt CENTRE SHELF QTY 1 H J I CABINET SHELF QTY 2 CABINET SHELF QTY 1 DIVIDER 2 QTY 1 DOOR (L&R Same) QTY 2 BOTTOM SUPPORT LEG QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please c
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION KR KL K1 RIGHT BACK PANEL QTY 1 LEFT BACK PANEL QTY 1 K2 LR LL BOTTOM BACK PANEL QTY 1 LEFT DRAWER FRONT QTY 1 MR ML LEFT DRAWER SIDE QTY 2 TOP BACK PANEL QTY 1 RIGHT DRAWER SIDE QTY 2 RIGHT DRAWER FRONT QTY 1 N DRAWER BACK QTY 2 O DRAWER BOTTOM QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service 6/18
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 28 4 3 CAM LOCK PIN CAM LOCK QTY 22 SETS 5 7 6 WOOD DOWEL Ø8 X 30 mm QTY 16 HANDLE M4 X 25 mm QTY 4 SETS PHILLIPS SCREW M3 X 12 mm QTY 12 PHILLIPS SCREW M3 X 15 mm QTY 8 MAGNET AND PLATE QTY 2 SETS 11 PHILLIPS SCREW M4 X 25 mm QTY 4 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 31 9 8 10 ALLEN KEY QTY 1 12 SHELF SUPPORT QTY 18 a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM Fron t/A vant A KR K1 Fron t/A vant KL DL BL G K2 H Fron t/A vant E H Fron t/A vant BR DR Fron t/A vant Fron t/A vant F I C I J MR N ML O LR LL 8/18
ASSEMBLY STEP 1 MR ML L 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front L . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides ML , MR . 3. Insert 2 Cam Lock 2 into pre-drilled holes on each Drawer Side ML , MR . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 MR O ML L 1. Slide Drawer Bottom O firmly into slots on Drawer Sides ML , MR and Drawer Front L .
ASSEMBLY STEP 3 N MR 1 O ML 3 L 1. Align Drawer Back N with Drawer Bottom O and press firmly into slot . 2. Attach Back N using 2 Allen Key Screws 1 through pre-drilled holes on each side ML , MR . 3. Use Allen Key 3 to tighten. Do not over tighten. STEP 4 4 NOTE: The screwdriver is not included in the hardware pack. L 1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front L . Repeat Step 1-4 for the second drawer.
ASSEMBLY STEP 5 Front / Avant DR Front / Avant E DL 2 STEP 6 DL 5 Front / Avant 1. Attach 3 Cam Lock Pins 2 to each Divider 1 DL , DR . 2. Align Cam Lock Pins with pre-drilled holes and attach Centre Shelf E . 3. Insert 6 Cam Locks 2 into pre-drilled holes on Centre Shelf E . 4. Use flathead screwdriver secure Cam Locks. Front / Avant Front / Avant Front / Avant E 2 DR F 1. Insert 2 wood dowels 5 into Divider 2 F . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely.
ASSEMBLY STEP 7 Front / Avant Front / Avant DR 1 F Front / Avant DL C 3 5 1. Insert 2 Dowels 5 into each Divider 1 DL , DR and Divider 2 F . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align pre-drilled holes on Bottom Shelf C with Dowels 5 in Divider 1 DL , DR and Divider 2 F . 4. Using 8 Allen Key Screws 1 attach Bottom Shelf C to Divider 1 D and to Divider 2 F .
ASSEMBLY 5 STEP 9 Front / Avant A 1 3 DR C DL Front / Avant Front / Avant Front / Avant Front / Avant BR BL 3 1 1. Insert 2 Dowels 5 into top corners of each Side BL , BR . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align pre-drilled holes on bottom corners of Top A with Dowels 5 in Sides BL , BR . 4. Using 12 Allen Key Screws 1 attach Top A to Sides BL , BR and Dividers DL , DR .
ASSEMBLY STEP 11 7 8 I 4 BR A Fro nt / Ava nt DR Fro nt / Ava nt Fro nt / Ava nt E DL BL Fro nt / Ava nt C 9 I 8 7 1. Attach hinges on Doors I to Sides BL , BR using Phillips Screws 9 . 2. Attach Magnet Plates 7 to bottom corner of Doors I using Phillips Screws 8 into guide holes on Doors I . 3. Attach Magnets 7 using Phillips Screws 8 into guide holes on Bottom Shelf C . 4. Use a Phillips screwdriver to attach Handles 4 to Doors I .
ASSEMBLY STEP 12 A BR C I E BL 11 DL I 11 H G H 1. Use 4 Shelf Supports 11 for each Shelf Cabinet G and H in desired location. 2. 2 Shelf Supports 11 may be used on back top of each shelf cabinet G and H as a tipping restraint. 3. Insert assembled drawers into glides on assembled TV Stand.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 13 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line or by email. We reserve the right to repair or replace the defective product, at its discretion.
