ASSEMBLY INSTRUCTIONS Description : COUNTER HEIGHT CHAIR WITH WOOD SEAT Dimension : W.18”1/2 x D.20”xH.42” Cube Size : 44.3”x19.6”x11” COUNTER HEIGHT CHAIR WITH WOOD SEAT -1- NW : 36.3 LBS GW : 41.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Description Bolt 1 (M6x60mm) 6 (M6x50mm) Lock Washer Flat Washer 4 10 (Ф6.5X9) 10 (Ф6.5x19) Allen Key Screw 1 5 Sketch Bolt 2 4 3 Qty 4 6 (4mm) (M4x40mm) STEP 1 Attach front legs (C-L) and (C-R) to the seat frame. Use bolts (1), washers (3) and (4) .Tighten with Allen Key (5).
STEP 2 Attach frame from step 1 to the chair back (A) by using bolts (2) and washers (3) and (4). Tighten with Allen Key (5) as shown below. Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to make sure the chair is level and then tighten the bolts.
