Assembly Instructions

ManualsBrandsCharlton Home ManualsAccent ChairsViqueque 32'' Wide Tufted Linen Armchair

Product Instructions for:

NOTE: Before you get started, remember to loosely attach all bolts. Once

product is fully assembled, set product upright. Press down evenly on all sides

until product sits level then fully tighten all bolts.

Tufted Club Chair

For assistance with assembly or questions contact:

Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com

PAGE 1

Summary of content (6 pages)

PAGE 1
Product Instructions for: Tufted Club Chair NOTE: Before you get started, remember to loosely attach all bolts. Once product is fully assembled, set product upright. Press down evenly on all sides until product sits level then fully tighten all bolts. For assistance with assembly or questions contact: Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.
PAGE 2
Tufted Club Chair Before beginning assembly, separate all parts and carefully study the parts diagrams below. Review all parts and hardware before disposing of any packaging. You may receive extra hardware with your unit. Call Customer Service for missing hardware.
PAGE 3
1: Bolt Dia. 5/16x2-1/2 (14) 2: Spring Washer (14) 3: Flat Washer (14) 4: Bolt Dia. 1/4x3/4 (8) 5: Spring Washer (8) 6: Flat Washer (8) 7: Wrench (1) For assistance with assembly or questions contact: Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.
PAGE 4
Tufted Club Chair Assembly Instructions Step 1 Unpack and lay parts on a clean, padded surface like a carpet or blanket. Check that you have all parts indicated on the front page. A LEGS LOCATION: Open the Velcro pouch on the bottom side of Seat (A). Remove legs box from inside. Open legs box and take out legs. E E G F Figure 1 Step 2 A Attach Seat (A) to Back Panel (B) using Bolts (1), Spring Washers (2) and Flat Washers (3) as shown in Figure 2. 7 1 2 3 Tighten Bolts (1) using Allen wrench (7).
PAGE 5
Step 3 Attach Armrests (C & D) to unit from Figure 2. A C Starting from interior of unit from Figure 2, insert Bolts (1), Spring Washers (2) and Flat washers (3) through pre-drilled holes and into metal plates on Armrests (C & D) as shown in Figure 3. D 3 2 7 1 Tighten Bolts (1) using Allen Wrench (7). B Figure 3 Step 4 Attach Legs (E, F & G) to unit from Figure 3.
PAGE 6
Step 5 Turn chair over. Now your Club Chair is ready to use! Figure 5 For assistance with assembly or questions contact: Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.