Installation Instructions

ManualsBrandsCharlton Home ManualsBlack Outdoor Hanging LightsSheard Textured Black 4 -Bulb 22'' H Outdoor Hanging Lantern

Outdoor

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliantNEC

junction boxes.

This product is safety listed for damp locations.

Incandescent lamps may be dimmed with a standard incandescent

dimmer. LED lamps may be dimmed with a LED dimmer. Consult

lamp manufacturer for additional information..

This instruction shows a typical installation.

Secure the mounting plate to the junction box.

Temporarily unscrew and remove the collar nut, then screw

the screw collar tightly onto the threaded nipple.

Install a quick link onto the end of the chain and fixture

loop. Determine the wanted height of the fixture and

remove a portion of the chain by opening a link and

removing it from the top.

Install the collar nut and canopy onto the chain (in that

order), then install the other quick link onto the free end of

the chain and screw collar.

Weave the cord through the chain, screw collar, canopy,

threaded nipple, and out of the junction box. Trim the cord

leaving enough to make electrical connections.

Connect the fixture to a suitable ground in accordance to

local electrical codes.

Connect the white fixture wire (square and/or rigid) to the

neutral power line wire with a wire nut.

Connect the black fixture wire (round and/or smooth) to

the hot power line wire with a wire nut.

Neatly place all the wires into the junction box, place the

canopy onto the ceiling, and secure it in place by screwing

the collar nut tightly onto the screw collar.

Install all glass panels by carefully sliding them into the

housing and securing them using the clips.

Screw the lamps into the sockets. Refer to the label on the

socket for Max Wattage Information.

Install the housing to the fixture and secure them together

by screwing on the housing screws.

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

CLIP

GLASS PANEL

HOUSING

SCREW

FIXTURE

LAMP

FIXTURE LOOP

JUNCTION BOX

COLLAR NUT

SCREW COLLAR

CANOPY

MOUNTING PLATE

THREADED NIPPLE

QUICK LINK

SAVETHESE INSTRUCTIONS!

Installation Instructions

Outdoor Hanging Lantern

Summary of content (1 pages)

PAGE 1
Installation Instructions Outdoor Hanging Lantern Outdoor GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This product is safety listed for damp locations. Incandescent lamps may be dimmed with a standard incandescent dimmer.