Installation & Assembly

HARDWARE IDENTIFICATION
8PCS
FLAT HEAD SCREW
(M4 x 30mm - RBW)
1
HARDWARE NAME
FIGURE
QTY
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 2 OF 3
ASSEMBLY TIPS:
1 . Remove hardware from box and sort by size.
1 . Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2 . This product is for home use only and not intended for commercial establishments.
2 . Please check to see that all hardware and parts are present prior to start of assembly.
3 . Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
Warning!
A
C
B
MIRROR
DRESSER
* FROM BOX ITEM # 203893
MIRROR SUPPORT
(PACKED WITH DRESSER)
1PC
PART NAME
FIGURE
QTY
2PCS
1PC
PARTS IDENTIFICATION
ASSEMBLY TIME
10 MINUTES
ASSEMBLY INSTRUCTIONS