Installation & Assembly

POWER BAR

NOTE:

Top drawer box

with Power Bar inside.

Back panel

STEP 1

STEP 2

1.1) Unscrew the pull from the back of drawer front.

1.2) Align & fasten the pull to drawer front using screw

and fully tighten with Phillips head screw driver (NOT INCLUDED)

COMPLETE

1PC

PART NAME

FIGURE

QTY

PARTS

IDENTIFICATION

ASSEMBLY INSTRUCTIONS

ASSEMBLY TIPS:

1. Remove hardware from box and sort by size.

2. Please check to see that all hardware and parts are present prior to start of assembly.

3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.

Warning!

1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store

immediately.

2. This product is for home use only and not intended for commercial establishments.

ASSEMBLY TIME

5 MINUTES

NIGHTSTAND

NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;

HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.

PAGE 2 OF 2