TEST REPORT
TEST REPORT Page 2 of 4 EXECUTIVE SUMMARY: The submitted sample complies with the requirement according to the protocol pages.
TEST REPORT Page 3 of 4 2. Total Lead Content in Storage Furniture - Client’s Requirement according to the Consent Decrees of California Proposition 65 Test Method: Sample was digested with reference to EPA 3050B. The lead content was analyzed by Atomic Absorption Spectrophotometer / Inductively Coupled Argon Plasma Spectrometer / Inductively Coupled Plasma Mass Spectrometer.
TEST REPORT Page 4 of 4 NOTE: If there is question or concern regarding the above results, please contact the appropriate lab person below: General questions & concern: Technical questions & concern: This test report is governed by the Terms and Conditions, available on request or accessible Attention is especially drawn to the limitations of liability, indemnification and jurisdictional provisions defined therein. This report is issued strictly based on the testing of the samples submitted by you.
MODERN TESTING SERVICES TEST PROTOCOL SUMMARY OF TEST RESULTS FOR Shelf / Rack / Cabinet Quality Protocol TEST CODE TESTED PROPERTY REQUIREMENT RESULTS Pass SUPPLEMENTAL PROTOCOLS SP-572 * Cal Prop 65 Shall be reviewed against the requirements of California proposition 65 to determined if additional testing or labeling is required. COMMENTS Fail X See test result Note: Additional cost, sample size & TAT may be required if testing to 1 or more supplemental protocol is necessary.
MODERN TESTING SERVICES TEST PROTOCOL SUMMARY OF TEST RESULTS FOR Shelf / Rack / Cabinet Quality Protocol TEST CODE TESTED PROPERTY REQUIREMENT RESULTS Pass Actual Use Functionality ASTM F2057- Stability of unloaded unit 14 Section 7.1 ASTM F2057- Stability with load 14 Section 7.2 ASTM F2057- Tipover restraints test 14 Section 4.5 / ASTM F3096-14 Section 4 COMMENTS Fail Shall function as intended as received.
MODERN TESTING SERVICES TEST PROTOCOL SUMMARY OF TEST RESULTS FOR Shelf / Rack / Cabinet Quality Protocol TEST CODE H-43012 H-43012 H-43012 H-43013 TESTED PROPERTY Distributed Load Test (Not applicable for glass shelf.) Loading capacity - top surface Display Shelf Loading (For light weight or glass shelves intended only for display of small or light items) REQUIREMENT Apply distributed test loads to all units, elements, and top surface.
MODERN TESTING SERVICES TEST PROTOCOL SUMMARY OF TEST RESULTS FOR Shelf / Rack / Cabinet Quality Protocol TEST CODE TESTED PROPERTY REQUIREMENT RESULTS Pass Pulling Force Stability - Pulling Force ANSI/BIFMA Furniture - leg strength test X5.5-98 section 12 modified / H41034 H-41019 Impact Durability If wall-mounting hardware is provided, no tipping should occur when horizontal force is applied on the top of the item.
MODERN TESTING SERVICES TEST PROTOCOL SUMMARY OF TEST RESULTS FOR Shelf / Rack / Cabinet Quality Protocol TEST CODE Actual Use ASTM F963-07 Section 4.27.1 TESTED PROPERTY Loading capacity - when mounted Lid Safety Feature (Trunk) ANALYTICAL * 16 CFR 1303 Lead Content Consumer Product Safety Improvement Act of 2008 / 16 CFR 1303 / AOAC 974.02 (mod) REQUIREMENT Max.
MODERN TESTING SERVICES TEST PROTOCOL SUMMARY OF TEST RESULTS FOR Shelf / Rack / Cabinet Quality Protocol TEST CODE TESTED PROPERTY REQUIREMENT RESULTS Pass COMMENTS Fail Image Appendix ASTM F205714 Labeling Page 6 of 6
