Other

TEST CODE COMMENTS
Pass Fail
RESULTSTESTED PROPERTY
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Shelf / Rack / Cabinet Quality Protocol
REQUIREMENT
Actual Use
- - NA
ASTM F-
963-07
Section
4.27.1
- - NA
Consumer
Product
Safety
Improvement
Act of 2008 /
16
CFR 1303 /
AOAC
974.02
(mod)
X See test result
Key:
Max. 2 times loading capacity (as claimed)
or if not claimed fully loaded as dependent
upon shelf width and depth (see loading
capacity) (load all shelves)
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing and communicate with
clients if additional test required. This protocol is the basic guidelines to follow and does not replace the content of the standard.
Lid Safety Feature (Trunk) Lid Support Mechanism shall be provided
to prevent sudden collapse or dropping of
the lid. No Automatic locking mechanism
allowed.
Loading capacity - when mounted
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal, States, and local
laws, regulations, and ordinances. A Pass Lab test result does not constitute a certification that a vendor's products
meet all legal requirements. It is the vendor's responsibility to manufacture their items to comply with all applicable laws
and in conformance with the purchase order terms and conditions.
*Additional Charge For This Test **Mandatory Requirement
ANALYTICAL
* 16 CFR 1303 Lead Content All accessible surface coatings shall not
contain lead in excess of 0.009% (90ppm)
of the weight of the total content of paint or
surface coating.
Report actual results or include data table
within report
Note: Component part testing (including
raw materials) is allowed.
In case of insufficient coating for testing
found on number of samples specified in
the protocol, vendor needs to provide
additional samples or component parts
(including raw materials) for testing.
Page 5 of 6