SOLAR LAMP US Patent # 7172307 Instruction Manual Visit our website or download the latest version of your instruction manual.
Introduction Thank you for your purchase. Our solar charged accent lighting eliminates the problems associated with most solar lighting available today. Our solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. The company also offers unique multi-purpose rechargeable products that range from party lights to emergency lighting products.
What's Inside? Open your package and remove the contents. Check to make sure all pieces are present and accounted for. You will need to follow these two steps to disassemble the unit completely Note: If you're not going to use Step 1 the 3” fitter base, disassemble the nut and part (H) from part (E).
Assembly Instructions: Note: If you are replacing an existing gas/electric post light, you must consult a certified technician to disconnect them before installation. 1. Attach the fixture (D) to the base (H) with the four supplied screws, as shown. Note: There are specific types of screws for specific surfaces. If unsure of the appropriate type of screw to use on your desired surface, please consult a professional. 1. Use a drill to make two holes in the desired surface. 2.
After assembling your specific bracket here are the steps to finish assembling your unit, this step applies to all three brackets: 1. Place the lens and cone (C) in the body (D). 3. Attach top(B) to the body(D) with the two supplied screw caps. 2. Turn on switch to desired setting. 6. Screw on top ornament. Replacing the Batteries (After several years of use, the battery may need replacing). 1. Unscrew the two screw caps and detach the top (B). Make sure the ON/OFF switch is in the OFF(O) position. 2.
WARNING: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in accordance with local, State and federal regulations. Do not mix old and new batteries. Maintenance Clean the solar panels regularly with a damp towel to guarantee optimum performance.