KING BED / TRÈS GRAND LIT ASSEMBLE INSTRUCTIONS / INSTRUCTIONS DE MONTAGE IF PARTS ARE ISING OR DAMAGES, DO NOT TURNER TO STORE To dard mission or replacement parts, contact us via e-mail , by Fax, or atoll Free parts nimber EN CAS DE PIÈCES MANQUANTES OU ENDOMMAGÉES, NE PAS RETOURNER AU MAGASIN Pour commander des pièces de rechange ou manquantes, contactez-nous par courriel 3, par télécopieur au ou au numéro sans frais dédié aux pinces, du lundi au vendredi
PARTS LIST / LIST DES PIECES NQ | DESCRIPTION QTY DESCRIPTION QTE BITE A | HEADBOARD PANNED DE TECH DE LIT FOOT BOARD 1 2 B INFIDELITY STRETCHER SLATES CENTER LEG PIED CENTRAL SIDE RAIL 2 3 E DELIGHTED 2 3
2 DRAPER LIGHT STAND WITT GRAY / TABLE DE NUIT A 2 TIROIRS AVEC PLATEAU ASSEMBLE INSTRUCTIONS / INSTRUCTIONS DE MONTAGE IF PARTS ARE ISING OR DAMAGES, DO NOT TURNER TO STORE To roder mission or replacement parts, contact us via e-mail , by Fax, or atoll Free parts nimber EN CAS DE PIÈCES MANQUANTES OU ENDOMMAGÉES, NE PAS RETOURNER AU MAGASIN Pour commander des pièces de rechange ou manquantes, contactez-nous par courriel & , par télécopieur au ou au numéro sans frais dédié aux pièces, du lundi au vendredi
FURNITURE CARE: Dust with a soft cloth following the grain patient of the wood. Dust often to remove the everyday abrasive particles from the wood surfaces. Before dusting, moisten cloth lightly with a spray product. Wood finishes also benefit from an occasional polishing. WARNING . Do not use this product unless all screws and bolts are scurvily tightened, Check that all screws and blats are tight every three months or as needed. Dispose of packing material properly.
PARTS LIST / LIST DES PIECES NO | DESCRIPTION Qry NO | DESCRIPTION Qry A | TOP PANEL 1 A | PANNED DU DEJESUS 1 B | LEFT ASSEMBLY 1 B | ASSEMBLAGE GAUCHE 1 C | RIGHT ASSEMBLY 1 C | ASSEMBLAGE ADROIT 1 D | TRAY 1 D | PLATEAU 1 E | FRONT APRON 1 E | ARMATURES SAVANT 1 F | BACK APRON 1 F | ARMATURES BARRIER 1 G | FRONT RAIL 1 G | CADRE SAVANT 1 H | FRONT BOTTOM RAIL 1 H | CADRE INFERIOR SAVANT 1 I | BACK BOTTOM RAIL 1 | | CADRE INFERIOR BARRIER 1 J | DUST PANEL 1 J | PANNED INFERIOR 1 K | BACK PANEL 1 K | PANNE
6 DRAPER DRESSER / COMMODE A 6 TIROIRS ASSEMBLE INSTRUCTIONS / INSTRUCTIONS DE MONTAGE IF PARTS ARE ISING OR DAMAGES, DO NOT TURNER TO STORE To roder mission or replacement parts, contact us via a-mail , by Fex, or atoll Free parts nimber EN CAS DE PIÈCES MANQUANTES OU ENDOMMAGÉES, NE PAS RETOURNER AU MAGASIN Pour commander des pièces de rechange ou manquantes, contactez-nous par courriel &, par télécopieur au ou au numéro sans frais dédié aux pièces, du lundi au vendredi
HARDWARE LIST / LIST DU MATERIEL aah pcs Wood Screw inch pcs Wood Screw 1 1/4 inch Advisably 2po Vis abolish Extra +1 Extra cc=4pcs Wood Screw cinch pcs Wood Screw 1 1/4 inch P Vis a obis 1/2 po P Vis a obis Extra +1 Extra ee =36 pcs Wood Screw cinch pcs Cam lock Bolt Vis d obis 3/4 po Bouillons Cam lock +1 Extra +1 Extra gg = 36 pcs Cam lock sets Handle with Bolt Vis Cam lock Poignant et bouillons +1 Extra W) ii =1 set Safety Bracket Kit Supports de security Loy O 0 mon
* Attache Chandelles (hh) to Small Draper Front (K) usine Colts (hh). * Attache Small Draper Let and Light (L) and (M) to Small Draper Rack (N) usine Woody Scores (dd). * Élide Small Draper Base (O) info the groove. * Attache Small Draper Front {(K) to Small Draper Let and Light Ide (L) and (M) usine Woody Scores (dd). * Attache Draper Support (P} to unit usine Woody Scores (dd). * Do the same step fo the net Small Draper.
9 * Attache Chandelles (hh) to Large Draper Front {Q) usine Colts (hh). * Attache Large Draper Let and Light (R) and (S) to Large Draper Rack (T) usine Woody Scores (dd). * Élide Large Draper Base (U) info the groove. * Attache Large Draper Front (Q) to Large Draper Let and Light Ide (R) and (S} usine Woody Scores (dd). * Attache Draper Support (P) to unit usine Woody Scores (dd). * Do the same step to the net Large Draw ers.
10 * Slide all the Drawers into unit. * Adjust the adjuster that has already been assembled to the legs to stabilize your Dresser. * To prevent your Dresser from tipping over, you may install the optional Safety Bracket Kit (i) as follows: 1 Attach Mounting Brackets (ii1) to the backside of unit using Wood Screws (iii. 2 Attach the rest of Mounting Brackets (ji1) to the wall using Anchor (ii2) and Anchor Screw (jig.
MIROIR FOR DRESSER / MIROIR POUR COMMODE ASSEMBLE INSTRUCTIONS / INSTRUCTIONS DE MONTAGE IF PARTS ARE ISING OR DAMAGES, DO NOT TURNER TO STORE To roder mission or replacement parts, contact us via e-mail , by Fax, or atoll Free parts nimber EN CAS DE PIÈCES MANQUANTES OU ENDOMMAGÉES, NE PAS RETOURNER AU MAGASIN Pour commander des pinces de rechange ou manquantes, contactez-nous par courriel 3, par télécopieur au ou au numéro sans frais dédié aux pièces, du lundi au vendredi
FURNITURE CARE: Dust with a soft cloth following the grain pattern of the wood. Dust often to remove the everyday abrasive particles from the wood surfaces. Before dusting, moisten cloth lightly with a spray product. Wood finishes also benefit from an occasional polishing. WARNING . Do not use this product unless all screws and bolts are securely tightened. Check that all screws and boats are tight every three months or as needed. Dispose of packing material properly.
HARDWARE LIST / LIST DU MATERIEL aa =4 pcs Bolt 19/16inch pcs Bolt 13/16inch Bouillon 19/16 inch Bouillon 1 3/16 inch +1 Extra +1 Extra = Spring Washer = Washer cc=8 pcs Roundel de Bloc ante dd =38 pes Roundel +1 Extra +1 Extra © = Allen Key ee =1 pc Clé Allen g:fi 0 won
PARTS LIST / LIST DES PIECES ~Y NO| DESCRIPTION QTY NO [ DESCRIPTION Query A | MIRROR 1 A MIRROR 1 B | BACK SUPPORT 2 B | SUPPORT BARRIER 2
1 OPTION 1/ OPTION 1 * Han the Miroir {(A) to the wall. * Accrocher le Miroir (A) sur le mur. OPTION 2/ OPTION 2 * You can combine the Miroir (A) to Dresser Unit (dols paralysante. If you nerd it, you can fol low thèse steps. * Attache Rack Supports (B} to Miroir (A) usine Colts (bb), Sprint Smasher {cc) and Smasher (dd). * Tum Colts (bb) clochardise usine Alken Key (ee). * Vous pouvez combiner le Miroir {A}) a fuité Commode (vendu séparément). besoin, vous pouvez suivre la prochaine &tape.
KING hoverboard / TETTE DE LIT DE TRÈS GRAND LIT ASSEMBLE INSTRUCTIONS / INSTRUCTIONS DE MONTAGE IF PARTS ARE ISING OR DAMAGES, DO NOT TURNER TO STORE To roder mission or replacement parts, contact us via a-mail , by Fax, or atoll Free parts nimber EN CAS DE PIÈCES MANQUANTES OU ENDOMMAGÉES, NE PAS RETOURNER AU MAGASIN Pour commander des pièces de rechange ou manquantes, contactez-nous par courriel 4, par télécopieur au ou au numéro sans frais dédié aux pièces, du lundi au vendredi
FURNITURE CARE: Dust with a soft cloth following the grain pattern of the wood. Dust often to remove the everyday abrasive particles from the wood surfaces. Before dusting, moisten cloth lightly with a spray product. Wood finishes also benefit from an occasional polishing. WARNING . Do not use this product unless all screws and obits are securely tightened. Check that all screws and blats are tight every three months or as needed. Dispose of packing material properly.