Assembly Instruction

Tighten all Bolts from step 2 using L-key (K) and step 3 using L-key (J)

that has been provided. Attach slat (7) to front rail (4) and back rail (5)

by unrolling and securing with 2 screws (I) per each side. Tighten all

screws using Philips Head screwdriver. (not included)

Attach back panel (3) to the back of each left arm & right arm by aligning

the holes and securing with 2 Allen Bolts (D) , 2 Spring Washer (E) , 2

Flat Washer (F) per each side using L-key (J).

(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)

Begin assembly by attaching each leg (6) to the bottom of left arm (1) &

right arm (2) securing with 2 Allen Bolts (B) per panel using L-key (J).

Attach the front rail (4) and back rail (5) to the left arm (1) & right arm (2).

Aligning holes and securing with 2 Allen Bolts (A) per each end using

L-key (K).

(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)

DAYBED

PAGE 1
DAYBED Begin assembly by attaching each leg (6) to the bottom of left arm (1) & right arm (2) securing with 2 Allen Bolts (B) per panel using L-key (J). Attach the front rail (4) and back rail (5) to the left arm (1) & right arm (2). Aligning holes and securing with 2 Allen Bolts (A) per each end using L-key (K).
PAGE 2
Your daybed should be done assembly as below. Attach the trundle front panel (8) & trundle back panel (9) to the trundle side rail (10) by aligning holes and securing with 2 Allen Bolts (A) per each end. Tighten all Bolts using the L-key (K). Attach slat (11) with castor to the trundle front panel (8) & trundle back panel (9) securing with 2 Allen Bolts (C) , 2 Spring Washer (E) , 2 Flat Washer (G) , by using L-key (J) per each side of slat.