Queen Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them Individually on a soft lath to prevent scratches or other damages occurring to the parts.
Queen Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth tn prevent scratches or other damages occurring to the parts. We have taken great care in the design of this product and request that yon carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. D. Py Upper Stretcher & Tee F. Lag 2 pts. Lower Stretcher 1p. Cam Lack Sew Gam Lock Bolt Fi Washer Key Wrench Saul Key Wreck Leis.
Assembly Instructions 2/3 IMPORTANT . * Do nat tighten up all the bolls until each parts property assembled, * You should keep Key Wrench in a safe place as you may need to frighten up the bolts In the future. STEP 1 insert Cam Lock Screws into the per-drilled holes of Headboard (A). STEP 2 Attach Leg (F) to the Posts (B) and (C). Nem STEP 3 * Attach Headboard (A) to Posts (B) and (C) by sliding metal clip on Headboard (A) down to metal sleeve on Posts (B) and (C).
Assembly Instructions STEP 4 Attach Upper Stretcher (D) fo unit using Cam Locks. (See figure 2) Gam Lok Fiat Washer Attach Lower Stretcher (E) to unit with Bolts and Flat Washers. Turn Bolt clockwise using Key Wrench.
Queen Foot board IMPORTANT NOTE Carefully remove all the parts from the carton and put + them individually an a soft cloth ta prevent scratches or other damages occurring to the pats. We have taken great care in the design of this | product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. "Part List G. : Foot board 1 pc.
IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually ona soft cloth to prevent scratches or other damages scouring to the parts. "We have taken great care in the design of this” product and request that you carefully and strictly follow aur assembly instructions to ensure a + completed product as if was designed. Stretcher ~ A 3 pes. Hu. i Side Panel 2 pas: Hardware List Bok Squats Washer, Hut rn Yong Serb Bes. +1 axle) 6 pcs. [+1 ext) Bes.
IMPORTANT * Do not tighten up afl the bolts & screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need ta lighten up the Nuts in the future. STEP 1 Insert Bolts into the per-drilled holes of Headboard and Foot hoard. STEP 2 Assemble Side Panels (H) to Headboard and Foot board using Square Washers and Nuts. Tighten all the Bolts with Wrench. (See figure 1). Figure 1 To level the unit, adjust the adjustable levelers on the bottom of legs.
VERY IMPORTANT 1 NEVER NEVER USE GLASS CLEANERS ON ALLOW LIQUIDS OF ANY KIND TO FINISHED FURNITURE. AMMONIA REMAIN ON THE FURNITURE. WILL CHEMICALLY ATTACK THE ABSORPTION CAUSES WOAD TO WARP LACQUER. . 0 AND SPLIT AND FINISHES TO LAMINATE, DONOR DONOR WRITE, K PLACE IN KE DIRECTLY | DIRECT SUNLIGHT, SURFACE. PREVENT PREVENT MARKING FADING DO NOT USE DO NOT H DO NOT COMMERCIAL PLACE HOT USE CRO WAXES AND me OBJECTS 4 | | rustier POLISHES. ON SURFACE, of BASED PAGE MATS.