Caution :You must read this before you proceed Please look in the velcro pouch for hardware packs and legs CHAISE Label Picture Description QTY A Chaise Seat 1 B Chaise Back 1 C Leg 4 1 of 6
Label Picture Description QTY ① Washer Ring 7 ② Bolt（M8*55MM） 5 ③ Flat Washer 5 ④ Spring Washer 5 ⑤ Allen Wrench 1 Before Beginning Assembly: 2 of 6
OVERVIEW Chaise Back(B) Chaise Seat(A) Leg(C) Leg(C) FRONT FACING Leg(C) This Chaise has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chaise parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Chaise Seat(A) Legs And Hardware Pack Position the Chaise Seat(A) facedown on a clean,non-marring surface,as shown.
Step 2 Chaise Back(B) Chaise Seat(A) ③ ④ ② ⑤ Install the Chaise Back(B) into the bottom of the Chaise Seat(A) using Bolt (②),Spring Washer(④),Flat Washer(③) with the Allen Wrench(⑤). Tighten all bolts at all joints completely.
Install the Leg(C) onto the Chaise Seat(A) and the Chaise Back(B) by placing a Washer Ring(①) onto the stem.Insert the threaded stem into the threaded hole at each corner of the bottom of the Chaise Seat(A) and the Chaise Back(B). Tighten the Leg by turning clockwise ,as shown. Repeat the same steps to install the remaining 3 legs. Step 4 Add or remove Washer Ring(①) where needed to achieve stability. Note:The use of Washer Ring(①) are optional and is eapecially useful to help alleviate slight wobbleness.
of 6
