Instruction of Cabinet Restraint Device ( CRD ) Caution: You must read this before you proceed. CABINET CAUTION : This Cabinet is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Cabinet and to prevent damage to the Cabinet, two people may be needed to execute this action.
Hardware ① 1.6 cm Screw 2 ② 5 cm Screw 2 ③ Metal Bracket 4 ④ Cabinet Restraint Strap 2 ! WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over.
① ③ ① ③ ① ③ A: Firstly, turn back the Cabinet outwards as shown above. Then fix one Metal Bracket (③) on the leg of Cabinet by the 1.6cm Self Tapping Screws (①) ① . The distance between the left edge of the leg and bracket is 0.3inch. The distance between the right edge of the leg and bracket is 0.3inch Repeat this step to fix another Metal Bracket (③) on product, as shown above.
B:Find out the screw holes on the wall. First, mark the point at same height on the wall as L-shaped Metal Bracket (③) on product. You can find these same points in two ways as below: 1.Move the Cabinet back to the wall ,make these points on the wall and product are at same height 2.Measure the height of the Matel Bracket and the walll by ruler ,keep them are accurately and same height. (Caution:The Cabinet Restraint Strap(④) between Metal Backets on product and wall should be within 3.5'' .
Care & Maintenance Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth.