Installation & Assembly

ManualsBrandsCharlton Home ManualsGarden Outdoor BenchesMaidste Outdoor Acacia Wood Garden Bench

Assembly Instructions

Caution: You must read this before you proceed

BENCH

CAUTION: This Bench is NOT a TOY.

Keep your child / children at bay during the assembly process.

Whenever lifting or moving the Bench and to prevent damage to the Bench, two

adults may be needed to execute these actions.

Summary of content (7 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed BENCH CAUTION: This Bench is NOT a TOY. Keep your child / children at bay during the assembly process. Whenever lifting or moving the Bench and to prevent damage to the Bench, two adults may be needed to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Backrest Panel 1 B Seat Panel 1 C Shelf 1 D Left Leg 1 E Right Leg 1 Description QTY ① Bolt (M8*45mm) 5 ② Bolt (M6*40mm) 5 ③ Allen Key 2 Hardware Label Picture 2
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Right Leg (E) Left Leg (D) Seat Panel (B) FRONT FACING Shelf (C) This Bench has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Bench, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Insert the tenon of the Seat Panel(B) into the mortise of Left Leg(D) and Right Leg(E). Attach Left Leg(D) and Right Leg(E) to Seat Panel(B) using Bolts(①) with Allen Key(③) as shown above. Do not fully tighten the Bolts.
PAGE 5
Step 3 With assistance from your adult partner, stand the Bench up. Attach Backrest Panel(A) to Right Leg(E) and Left Leg(D) using Bolts(②) with Allen Key(③) as shown above. Do not fully tighten the Bolts. Step 4 C Insert Shelf(C) onto the bottom Rails of Left Leg(D) and Right Leg(E).
PAGE 6
Step 5 Then carefully sit onto the Bench. This pressure will help the Bench reach full alignment at all joints. In a sequential manner, gradually tighten all Bolts until evenly secured. Inspect the Bench and make sure all parts are adequately connected. Your Bench is ready for use. This Bench can only be used on a flat, level surface.
PAGE 7