Assembly Instruction

LIST OF PARTS
Snap on Mantel Top
1 PC
LIST OF HARDWARE
Front Support
MS0952V
1 PC
Screw F6 x 1 1/4”
RF10002
1 PC
1. Open the left panel and right side panel of corner shelf
as shown in Diagram 1.
2. Put the front support (MS0952V) into the hole under the
Bottom shelf as per Diagram 2.
Metal Clip
Securely Front
Support
Left Panel
Diagram 1.
Diagram 2.
Diagram 3.
Diagram 4.
Anti-Tipping
Screw P6 x 5/8”
RF10080
2 pcs.
Screw P6 x 5/8”
RF10080
Screw P6 x 1 1/4”
RF10103
2 pcs.
Metal Plate
RF40214
2 pcs.
Metal Plate
RF40214
Use screw (RF10002)
through predrilled hole
(A) Snap on Mantel Top
RF10103
Wall
Use metal plate (RF40214) and
screws P6 x 5/8” (RF10080)
to attach two side panels thru the studs
into the wall, using screws P6 x 1 1/4”
(RF10103) as per Diag. 4.
Anti-Tipping
A
Metal Plate
Metal Plate
“It is dangerous to stack two units one on top of the other.
The small base isn’t stable enough for such combination.”
Alignment the hole’s
mantel top to meet
the pins before press
down to “click” locked.
Assembly Instruction Sheet
Folding 4-Tier Corner Shelf