Assembly Instruction

LIST OF PARTS

Snap on Mantel Top

1 PC

LIST OF HARDWARE

Front Support

MS0952V

1 PC

Screw F6 x 1 1/4”

SC10002

1 PC

1. Open the left panel and right side panel of corner shelf

as shown in Diagram 1.

2. Put the front support (MS0952V) into the hole under the

Bottom shelf as per Diagram 2.

3. Turn each shelf down to rest on the

metal clip. Then snap on mantel top

(A) per Diagram 3.

4. Turn shelf unit to the back. Place the

screw F6 x 1 1/4” into the hole on the left

side panel to secure the bottom shelf as

per Diagram 4.

Metal Clip

Securely Front

Support

Use screw through predrilled hole

Left Panel

(A) Snap on Mantel Top

Diagram 1.

Diagram 2.

Diagram 3.

Diagram 4.

STACKABLE OPTION

1: Gently lift the second corner shelf

and place it on top of the first as per

the picture show.

the ball like tip should securely fit

into ease hole at the bottom of the

corner shelf.

With two units stacked together

remove the front support.

Assembly Instruction Sheet

Folding 4-Tier Corner Shelf