Installation & Assembly

ITEM PART DESC. QTY ITEM PART DESC. QTY
A
Table top 1 D Wooden legs 4
B
Wooden shelf 1 E Extension legs 4
C
Leg levelers 4
STEP ONE STEP TWO
STEP THREE STEP FOUR
Assembly Instructions
Turn table top upside down.Screw wooden legs to
the bottom of the table top and gently tighten the
legs.Please do not screw the legs too tight.
Put the shelf over the end of the legs,slightly adjust
the wooden legs so the screw holes on the legs are
lined with the holes on the shelf.
Laying out all parts and hardware and identifying each part as shown may help you as you
assemble the table.
Screw extension legs through the shelf to connect
with wooden legs as shown.Screw leg levelers to
the end of legs.
Finish product.If the table isn't on same level,
Please adjust leg levelers a bit.