Owner Manual

Step 16
å
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D107 and D108).
å
Fasten the DRAWER RIGHT (40CC) and DRAWER LEFT (40CD) to
the DRAWER SIDES (D107 and D108). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the
slotted hole in the SLIDE.
å
Fasten a PULL (168K) to the DRAWER FRONT (T). Use a SILVER
5/8" MACHINE SCREW (15S).
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
10A
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S
D107
D108
T
1
2
3
4
Roller end
Roller end
1
2
3
4
SILVER 5/8" MACHINE SCREW
(1 used for the PULL)
15S
Page 20
168K