Instructions / Assembly

13
Quick-Disconnect
Coupler
Sear Burner
Hose Fitting
Side Hole
Battery Installation
Remove burner igniter cap and insert battery with
positive end of battery toward igniter cap. Replace
igniter cap and make sure the igniter is working
properly.
Grease Tray Installation
Insert sear burner grease tray into opening on
front side of unit.
SEAR BURNER
Hose Connection
After dropping in the sear burner, run the
sear burner hose fitting through the side
hole and pull hose through as far as
possible. Then connect it to the quick-
disconnect coupler
.
Quick-Disconnect Coupler
Sear Burner Hose Fitting
Push sleeve back to attach
Sleeve